Electronics Compliance Services for EMC, CE Marking & UKCA Certification De-Risk Your Product with Expert Electronics Compliance
Bringing an electronic product to market requires more than functionality—it demands full compliance with EMC, CE marking, UKCA and RoHS requirements.
At Circad, we provide electronics compliance services that integrate regulatory requirements into your design from the outset. By addressing electromagnetic compatibility (EMC), material compliance, and certification requirements early, we help you avoid costly redesigns, reduce delays, and achieve a faster route to market.
Whether you are developing a new product or preparing for certification, our engineering-led approach ensures your design is ready for CE compliance and UKCA certification.
Our Electronics Compliance & Certification Capabilities
EMC Testing & Electromagnetic Compatibility (EMC)
EMC is one of the most critical—and most common—causes of product failure during certification.
EMC-focused PCB design and layout
Identification of emission and immunity risks
Signal integrity and noise reduction strategies
Pre-compliance testing to validate performance early
Preparation for formal EMC testing
By embedding EMC best practice into your design, we significantly reduce the risk of failure at test.
CE Marking & CE Compliance
Achieving CE marking requires more than testing—it demands a structured approach to CE compliance across design, documentation and validation.
We help you:
Identify applicable directives and standards
Prepare technical documentation and technical files
Support CE certification requirements
Produce Declaration of Conformity documentation
Our goal is to ensure your product is fully prepared before entering the certification process.
UKCA Certification & UK Regulatory Compliance
For products placed on the UK market, UKCA marking is essential. We provide support for:
UKCA certification and marking requirements
Alignment between CE and UKCA where dual compliance is required
Identification of UK-specific regulatory obligations
Preparation for testing and approval
This ensures your product can be confidently placed on both UK and EU markets where required.
RoHS & Material Compliance
Compliance with RoHS is critical for electronic products and their supply chains. We support:
Assessment of restricted substances risk
Supplier documentation and declarations
Ongoing compliance management
This ensures your product remains compliant throughout its lifecycle—not just at launch.
REACH & Environmental Compliance
While often overlooked, REACH compliance is an essential part of broader regulatory compliance. We help you:
Identify potential material risks
Assess compliance obligations
Support documentation requirements
Align supply chain practices
This protects both your product and your business from regulatory risk.
Compliance Built Into Your Design Process
The most effective way to achieve compliance is to design for it from the beginning. Our design for compliance approach ensures:
Early-stage compliance planning
Component selection aligned with regulatory requirements
PCB layout optimised for EMC performance
Design reviews to identify compliance risks early
By integrating compliance into the design process, we reduce development time, cost, and risk.
Pre-Compliance Testing vs Formal EMC Testing
Relying solely on formal testing can be costly if issues arise late in development. Our pre-compliance testing approach allows you to:
Identify EMC issues early
Validate design decisions before certification
Reduce the risk of failure during electromagnetic compatibility testing
We work closely with accredited test houses, ensuring your product is fully prepared for final certification.
Common Compliance Challenges We Solve
We regularly support clients facing:
Failure during EMC testing
PCB designs causing excessive emissions
Unclear CE marking or UKCA requirements
Incomplete technical documentation
Risks related to RoHS compliance and material selection
Our engineering-led approach identifies and resolves these issues before they impact your project timeline.
Industries & Applications We Support
Our electronics compliance services support a wide range of applications, including:
Industrial electronics
IoT and connected devices
Embedded systems
High-reliability electronics
Products requiring robust EMC performance
Each application has unique compliance requirements—we ensure these are fully addressed.
Why Choose Circad for Electronics Compliance
Compliance is not just a regulatory requirement—it is a design challenge. Circad combines engineering expertise with compliance knowledge to deliver:
Integrated EMC, CE marking, UKCA and RoHS compliance support
Reduced risk of certification failure
Faster route to market
Practical, hands-on engineering support
Proven design-for-compliance methodologies
We don’t just help you pass—we help you pass first time.
Our Electronics Compliance Process
Our structured process ensures complete coverage:
Requirements Review – Identify EMC, CE, UKCA and RoHS requirements
Risk Assessment – Highlight compliance risks early
Design for Compliance – Implement best-practice engineering solutions
Pre-Compliance Testing – Validate performance
Certification Preparation – Ensure documentation readiness
Formal Testing Support – Assist through certification
This provides clarity, control, and confidence at every stage.
Start Your Compliance Journey Early
The earlier compliance is addressed, the easier—and more cost-effective—it becomes.
If you are developing a product or preparing for EMC testing, CE marking or UKCA certification, a structured compliance review can identify risks before they become costly problems.
Could your electronics design or manufacture do with a compliance review? Let’s talk – we’re happy to provide expert advice with no obligation.
Circad Certification and Policies
Certificates and policy statements on Circad's environmental, technical and quality credentials
ISO 9001 – Quality Management Certification
Our ISO 9001 certification demonstrates our commitment to quality, consistency, and continuous improvement in our processes.
Click here to view our certificate.
ISO 13485 – Quality Management Certification
Our ISO 13485 certification demonstrates our ongoing dedication to designing and manufacturing high-quality, reliable, and regulatory-compliant electronics for the medical sector.
Click here to view our certificate.
RoHS Compliance Statement
We ensure our products comply with the Restriction of Hazardous Substances (RoHS) directive, limiting hazardous materials in electrical and electronic equipment.
Click here to read our compliance statement.
REACH Compliance Statement
As part of our commitment to environmental and chemical safety, we adhere to REACH regulations, ensuring responsible management of substances used in our products.
Click here for details.
PFAS Compliance Statement
We prioritize safety and sustainability by complying with PFAS (Per- and Polyfluoroalkyl Substances) regulations, ensuring responsible material usage.
Click here to view our compliance statement.
WEEE Statement of Compliance
Circad Design Limited is committed to environmental responsibility and complies with the Waste Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU) and the UK WEEE Regulations 2013.
Click here to view our recycling policy
Recycling Policy
Circad Design Limited is committed to environmental responsibility through effective recycling and sustainable management of packaging materials.
Click here to view our recycling policy
Environmental Policy
Circad Design is aware that its activities impact upon the environment and its aim is to reduce such impact wherever possible, by promoting environmental stewardship at all levels of our organisation.
Click here to view our environmental policy
Quality Policy
Circad Design Limited strives to be the leading organization in the Electronic Assemblies industry and related sectors. Our goal is to design, develop and supply high-quality, reliable, cost-effective, and innovative products, including equipment, systems, and software, that meet customer and regulatory requirements.
Click here to view our quality policy.
Persistent Organic Pollutants (POPs) Declaration
Circad Design Limited specializes in the design and manufacture of electronics’ assemblies across all industries. We are committed to regulatory compliance, environmental responsibility, and transparency regarding the presence of Persistent Organic Pollutants (POPs) in our products.
Click here to view our POPs compliance statement.
Our Certified IPC Trainers (CIT), are authorized by IPC International to deliver training and certification programmes based on the IPC-A-610 standard for electronic assembly.
Our Certified IPC Trainers (CIT), are authorized by IPC International to deliver training and certification programmes based on the 1-STD-001 standard for Soldered Electrical and Electronic Assemblies.
PCB DESIGN
PCB PROTOTYPE UK
PCB MANUFACTURING
